Bernina 475 QE, User Manual

Page: 91 / 126

Buttonholes
91
9.5 Cord
Using cord with the Buttonhole Foot #3
Prerequisite:
• The Buttonhole Foot #3 is fitted and raised.
> Insert the needle at the beginning of the buttonhole.
> Hook the cord over the center pin at the front of the Buttonhole Foot.
> Pull both cords ends under the Buttonhole Foot to the back and place each a cord into a groove of the
sole.
> Lower the Buttonhole Foot.
> Sew the buttonhole in the usual manner.
> Pull the cord loop until the loop disappears in the bartack.