manualshive.com logo in svg

Bernina 475 QE, User Manual

Share
Download
Bernina 475 QE User Manual Download Page 107

Care and maintenance

107

UPDATE

> Tap «Update Firmware».

Update

> To start the firmware update, tap «Update»

. 

Please note:

 The update may take several minutes. During the update, do not switch the machine off

and do not remove the USB stick.
–

The machine restarts. Once the update is complete, a message appears.

Recovering saved data

If personal data and settings after a software update are not available anymore, they can be transferred to
the machine again afterwards.

> Insert the BERNINA USB stick which provides the saved data and settings into the USB port of the

machine.

> Tap «Home».

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Maintenance/Updates».

UPDATE

> Tap «Update Firmware».

NOTICE

The BERNINA USB stick (optional accessory) has been removed too early

Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred

successfully.

> Tap «Load Data».

–

After the data has been transferred, a green tick is temporarily displayed.

12.2 Machine

Cleaning the display

> Clean the display in the switched off status with a soft slightly damp microfiber cloth.

Summary of Contents for 475 QE































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands