9
ANGLEMASTER • AM3000DX
© Bernhard and Company Limited
3. Setting Up
1. BRACKET BODY
2. ADJUSTABLE SUPPORT
PLATE
3. LOCKING KNOB A /
ADJUSTABLE LEVER
4. TAPERED SUPPORT PIN
5. SUPPORT CUP
6. LOCKING KNOB
7. CENTRAL JACKING SCREW
8. JACKING SCREW END
EXTENSION
9. KNURLED LOCKING NUT
10. TRUNNION
11. LOCKING KNOB
12. SUPPORT BRACKET
3.1
General
3.1.1 The ANGLEMASTER has a capacity of 40” between mounting brackets for complete
bedknife/bedbar assemblies, or 42” for plain blades clamped directly to the mounting bar.
3.2
Mounting a bedknife
3.2.1 The machine is equipped with adjustable, universal bedknife mounting brackets
(adjustable quadrant brackets may also be supplied) which can easily be set to correspond
with bed-bar fixing holes. In this way the bedknife is supported on the machine in a way
that resembles, as closely as possible, its mounting in a cutting unit. Special adapters are
available when required for certain units.
3.2.2 Attach adjustable support plate (2) through horizontal slot using locking knob A /
adjustable “kip” lever (3).
3.2.3 Fix either tapered pin (4) or cup (5) to adjustable support plate (Tapered pin fits all
bedknife assemblies which either bolt on or locate over a male pivot pin; Cup support is for
bedknife assemblies which mount similar to Toro 216, Spartan, 3500, 6500 etc).
OR
1
2
4
5
6
7
8
9
10
12
12
14
3
Summary of Contents for ANGLEMASTER 3000DX
Page 22: ...22 ANGLEMASTER AM3000DX Bernhard and Company Limited 8 Parts List Continued BASE FRAME ...
Page 24: ...24 ANGLEMASTER AM3000DX Bernhard and Company Limited MAIN FRAME 8 Parts List Continued ...
Page 26: ...26 ANGLEMASTER AM3000DX Bernhard and Company Limited DUST TRAY GUARDS 8 Parts List Continued ...
Page 30: ...30 ANGLEMASTER AM3000DX Bernhard and Company Limited 8 Parts List Continued ...
