14
ANGLEMASTER • AM3000DX
© Bernhard and Company Limited
3.6
Grinding stone replacement
Isolate the electrical supply. Rotate the mounting bar so that the top face (magnets) face
the operator. Wind the grinding head back to it’s rear-most position (nearest the operator)
Insert a 6mm hex key into the socket at the rear of the motor and undo the grindstone nut
with the box spanner provided.
Before fitting a replacement stone, the new stone should be carefully examined for
damage. It should be held loosely and “rung” by tapping gently with a non-metallic object
such as a screwdriver handle. A sound stone will make a clear ringing noise. Reject a
stone that sounds “dead”. Ensure that there is no loose grit/debris between the stone and
the mounting flanges.
Box spanner
Key
3. Setting Up
(Continued)
Summary of Contents for ANGLEMASTER 3000DX
Page 22: ...22 ANGLEMASTER AM3000DX Bernhard and Company Limited 8 Parts List Continued BASE FRAME ...
Page 24: ...24 ANGLEMASTER AM3000DX Bernhard and Company Limited MAIN FRAME 8 Parts List Continued ...
Page 26: ...26 ANGLEMASTER AM3000DX Bernhard and Company Limited DUST TRAY GUARDS 8 Parts List Continued ...
Page 30: ...30 ANGLEMASTER AM3000DX Bernhard and Company Limited 8 Parts List Continued ...
