Bernecker + Rainer 5PC820.SX01-00, User Manual

Page: 127 / 318

Software • BIOS options
Section 4
Soft
w
are
127 Automation PC 820 User's Manual V 1.20
1.5.5 CPU configuration
Figure 48: 945GME - Advanced CPU Configuration
BIOS setting Meaning Setting options Effect
MPS Revision This option supports the use of multiple
CPUs (MPS=multi-processor system). 1.1 Sets MPS support Revision 1.1
1.4 Sets MPS support Revision 1.4
Max CPUID value
limit Option for limiting the CPUID input value.
This could be necessary for older
operating systems. Enabled The processor limits the maximum CPUID input
value to 03h if necessary when the the processor
supports a higher value.
Disabled The processor returns the current maximum
value upon request of the CPUID input value.
Execute Disable Bit Option for enabling or disabling hardware
support for prevention of data execution. Enabled Enables this function.
Disabled Disables this function.
Core Multi-
Processing When using a Dual Core processor, this
option can be used to disable a core. Enabled Both cores are used in a Dual Core processor.
Disabled Only one core is used in a Dual Core processor.
Table 85: 945GME - Advanced CPU Configuration - Setting options
Advanced
Configure advanced CPU settings Select the revsion
should be offered by
the BIOS.
Execute Disable Bit
Intel(R) SpeedStep(tm) tech.
of the multi processor
support interface that
Select Screen
Max CPUID Value Limit [Disabled] Select Item
[Enabled] +- Change Option
Core Multi-Processing [Enabled] F1 General Help
[Automatic] F10 Save and Exit
Max. CPU Frequency [1500 MHz] ESC Exit
C1 Config. [Standard]
C2 Config. [Disabled]
C3 Config. [Disabled]
C4 Config. [Disabled]
Module Version -13.04
Manufacturer:Intel
Brand String:Intel(R) Core(TM)2 CPU
L7400
Frequency :1.50GHz
FSB Speed :667MHz
Cache L1 :64 KB
Cache L2 :4096 KB
MPS Revision [1.4]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.