Bernecker + Rainer 5PC820.SX01-00, User Manual, Page: 123 / 318

Software • BIOS options
Section 4
Soft
w
are
123 Automation PC 820 User's Manual V 1.20
1.5.4 Graphics configuration
PCIE Port 1
IOxAPIC enable This option is used to enable or disable
the APIC (Advanced Programmable
Interrupt Controller) on the PCIE port 1.
The IRQ resources available to the
system are expanded when the APIC
mode is enabled. Disabled Disables this function.
Enabled Enables this function.
PCIE Port 2
IOxAPIC enable This option is used to enable or disable
the APIC (Advanced Programmable
Interrupt Controller) on the PCIE port 2.
The IRQ resources available to the
system are expanded when the APIC
mode is enabled. Disabled Disables this function.
Enabled Enables this function.
PCIE Port 3
IOxAPIC enable This option is used to enable or disable
the APIC (Advanced Programmable
Interrupt Controller) on the PCIE port 3.
The IRQ resources available to the
system are expanded when the APIC
mode is enabled. Disabled Disables this function.
Enabled Enables this function.
Figure 47: 945GME - Advanced Graphics Configuration
BIOS setting Meaning Setting options Effect
Table 83: 945GME - Advanced PCI Express Configuration - Setting options (cont.)
Advanced
Graphics Configuration Select primary video
adapter to be used
during boot up.
Internal Graphics Mode Select [Enabled, 8MB]
DVMT Mode Select
DVMT/FIXED Memory [128MB]
Boot Display Device
Local Flat Panel Type
SDVO Port B Device [DVI]
[DVMT Mode]
[Auto]
Boot Display Preference [SDVO-B SDVO-C LFP]
[Auto]
Local Flat Panel Scaling [Centering]
Select Screen
Select Item
SDVO Port C Device [None] +- Change Option
F1 General Help
SDVO/DVI Hotplug Support [Enabled] F10 Save and Exit
Display Mode Persistence [Enabled] ESC Exit
Primary Video Device [Internal VGA]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.