Bernecker + Rainer 4MP181.0843-03 User Manual Download Page 97

Page: 97 / 160

Software • Mobile Panel with Windows CE

apte

r 4

Soft

are

Mobile Panel User's Manual V 1.5

2. Mobile Panel with Windows CE

2.1 General Information

Windows CE is an operating system which is optimally tailored to B&R's Mobile Panel device. It
includes only the functions and modules which are required by each device. This makes this
operating system extremely robust and stable.

Advantages

•

Windows CE is a 32-bit operating system with multitasking and multithreading
capabilities.

•

In addition to being compact, it even offers high performance for configurations with
limited RAM.

•

Windows CE is best suited for integrated automation used in industrial systems.

•

Windows CE is also less expensive than other Windows licenses.

The Windows CE version available from B&R has been developed for Mobile Panel BIOS
devices and is only available with a Mobile Panel BIOS device.

2.2 Requirements

The Mobile Panel device must meet the following criteria to run the Windows CE operating
system.

•

Mobile Panel device with BIOS

•

At least 128 MB SDRAM main memory

2.3 Installation

Windows CE is usually preinstalled at B&R Austria.

Summary of Contents for 4MP181.0843-03

































































































































































Search results

Summary of Contents for 4MP181.0843-03

Reviews:

Brands by name

Popular brands

Bernecker + Rainer 4MP181.0843-03, User Manual

Search results

Summary of Contents for 4MP181.0843-03

Reviews:

Brands by name

Popular brands