Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 95 / 160

Software • Mobile Panel with Automation Runtime
Ch
apte
r 4
Soft
w
are
95 Mobile Panel User's Manual V 1.5
1.3 Operation and Monitoring with the Mobile Panel
Control programs are distributed and run over several PLC stations. Fieldbus systems are used
to connect I/O systems and drives to the PLCs. Machine operation and visualization take place
on a central Mobile Panel, which uses Ethernet to communicate with the controllers.
1.4 Summary Screen
When the Mobile Panel device is turned on, a summary screen is briefly displayed which shows
the parameters most important to an Automation Runtime Mobile Panel device.
Figure 49: Operation and monitoring with the Mobile Panel
Information:
The following image and description refer only to Automation Runtime V2.66. For
this reason, this image may not match with Automation Runtime version installed
on your device.
Line communication Ethernet
Visualization & operation
Drive technology
Remote I/O systems
MP281
X67
Drive technology
Remote I/O systems
X67
System 2005 System 2005
Control system
Ethernet Powerlink Ethernet Powerlink