Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 23 / 160

Technical Data • Introduction
Chap
ter 2
Tec
hni
cal
Data
23 Mobile Panel User's Manual V 1.5
1.2 Construction
Mobile Panel devices are cable connected; i.e. they are are connected with the switching cabinet
using a cable. For operation, the following individual components are needed:
• Operating unit
• Handle
• Connection cable
• Switching cabinet cable
An optional wall mount is available for storing all connection cables during stationary operation
of the system for the Mobile Panel device (for more see Section 3.6 "Wall Mount" on Page 77).
Figure 2: Mobile Panel device design
Operating unit
Handle
Connection cable
Switching cabinet cable