Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 140 / 160

140
Maintenance / Servicing • Exchanging the Connection Cable
Mobile Panel User's Manual V 1.5
8) Put the handle and panel back together again. Note the following when doing so: All cables
must be guided through to the left of the cover screws (1) (2). When placing the handle, both
the of the existing markings (3) must be on top of each other.
9) Screw in the cover screw.
Figure 68: Connecting the handle with the panel
Danger!
Before putting the handle and the panel back together again, all connectors --
especially those for the safety engineering (enable switch connector (ST1) and the
entry device (ST3) -- must be checked for contact with the attachment cable!
Warning!
Cables may not be wedged in when the unit is put back together.
Figure 69: Tightening the cover screw
Danger!
Before commissioning the machine or system, all safety features of the
Mobile Panel device must be checked for functionality.
Close