Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 136 / 160

136
Maintenance / Servicing • Exchanging the Connection Cable
Mobile Panel User's Manual V 1.5
2. Exchanging the Connection Cable
2.1 Procedure
1) Remove the handle by loosening the hex screw with a 4 mm screwdriver.
2) Tip up the side of handle to release the connectors of the old attachment cable to the panel.
Danger!
The attachment cable may only be exchanged by trained personnel when the
Mobile Panel device and the entire system are turned off.
Warning!
Before dismounting, place the Mobile Panel device on a clean flat surface with the
display facing down so that the operating elements are not damaged.
Figure 61: Taking out the locking screw
Figure 62: Removing the attachment cable
Open
Lift cover
Remove plug