manualshive.com logo in svg

Berlin Heart EXCOR Adult, Instructions For Clinical Use, Page: 143 / 212

Share
Download
Berlin Heart EXCOR Adult Instructions For Clinical Use Download Page 143

1015002x00

143

Baby Buggy - Stroller Board

en

WARNING

15

Baby Buggy - Stroller Board

15.1 Safety Information

 

The stroller board may only be connected to a stroller that has been ob-
tained from Berlin Heart. Otherwise, secure connections and safe us-
age cannot be guaranteed.

Activate the brake whenever the transport system is not in motion. The 
brake prevents the caddy from rolling away accidentally.

15.2 General

The driving unit can be connected to a stroller using the stroller board. The driving unit 
and accessory bag are transported on the stroller board.

15.3 Setup

Fig. 15-1  

Stroller Board

15.4 Mounting the Stroller Board

15.4.1 Checking the Scope of Delivery

After unpacking, check the scope of delivery and lay out the parts.

1

Snap-in connector

2

Mounting hook

3

Crossbar to hang the bag

4

Hook for bag

5

Mount

1

2

3

4

5

Name

Unit

Summary of Contents for EXCOR Adult





















































































































































































































Reviews:

No comments