Step 1
Cordless Drill
7/16" Wrench
1
4
" x 2"
Bolt x8
1
4
" Flange
Nut x8
1
1
2
" Buglehead
Screw x4
3" Buglehead
Screw
5
8
" Panhead
Screw x16
Umbrella Knob x2
Dining Height x8
Counter Height x16
Bar Height x16
Harbor Table Assembly 60" Round (Dining, Counter & Bar Heights)
Dining Height
Counter Height
Bar Height
Hardware Included
Tools / Items Needed
Harbor Table Assembly Guide
Open the box containing the Table top on all sides
but leave the top laying in the box. Next fasten all
cross pieces to 1 base assembly by inserting
cross piece tenons into mortises on base
assembly and fasten using 3" Buglehead Screws.
Repeat assembly on other side with remaining
base assembly.
NOTE: Dining Height will only
have 1 set of cross pieces.
Counter and Bar Height Only
3" Buglehead Screws
Step 1 Detail
Allen Wrench
(Included)
#2 Square Drive Bit
