1/4" x 3" Bolt
1/4" x 4 1/2" Bolt
1/4" x 3 1/2" Bolt
5/16" x 2 1/2" Bolts
5/16" Flangenuts
1/4" Flangenuts
1/4" x 3" Bolt
(Double Glider Only)
1/4" Flangenut
(Double Glider Only)
Step 1
Fasten the Arm & Leg Assembly to the Seat and
Back using the bolts and nuts specified below.
Note: The example shows a double glider. The single
glider is same except for one less bolt & nut as indicated.
Please assembly your glider on a soft surface to
avoid scratching the material.
Step 2
Turn the chair on the other side and fasten
the second Arm & Leg Assembly by repeating
step 1.
Glider Chair
Comfo Back & Cozi Back
Single & Double Counter
Height Gliders Assembly Guide
Tools Required
Hardware Included
Comfo Back Single
Comfo Back Double
Comfo Back Double
Cozi Back Single
Allen Wrench
(Included)
#2 Square Drive Bit
(Included)
Cordless Drill
7/16" Wrench
1/2" Wrench
1/4"x3"
Bolts (x 3)
1/4"x3 1/4"
Bolts (x 4)
1/4"x3 1/2"
Bolts (x 3)
1/4"x4 1/2"
Bolts (x 3)
1/4" Flangenuts
(X 11)
5/16"x3"
Bolts (x 4)
5/16"x2 1/2"
Bolts (x 4)
5/16" Flangenuts
(X 4)
5/16" Locknuts
(X 8)
5/16" Capnuts
(X 4)
5/16" Aluminum
Spacers (X 4)
Glider Brackets
(X4)
3" Buglehead
Screws (X 10)
2" Pandeck
Screws (X 4)
1 3/4" Buglehead
Screws (X 2)
