Assembly Directions for
Adirondack Chair Tete-a-Tete
#ATAT1823
STEP #1 -
Fasten 1-Aluminum Bracket
to the left arm of one chair
and the right arm of the
second chair using ¾ " Panhead
Screws. Slide the Bracket all
the way forward against the
front leg.
STEP #3 -
STEP # - 2
Place the Tete-a-Tete onto the angle brackets and
secure by screwing the knobs into the pre-drilled
holes in the underside of the table.
HARDWARE PACKAGE
10 ¾ " Screws
4
Knobs
PACKAGE CONTENTS
1
Tete-a-Tete Table
1
Hardware Package
2
Aluminum Angle Brackets
TOOLS NEEDED:
Cordless
Drill/Screwdriver
Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT IN
CORRECT
1
2
3
4
5
Use to measure bolts
Aluminum Angle Bracket
