background image

®

 

Go Berkey

Kit

Introduction

Now that you have bought your 

 water purifier,  you  have  taken the  first  

step  toward  protecting 

  from  disease  causing 

pathogens,  parasites,  harmful 

chemicals, heavy metals  and other waterborne contaminates. he ease of operation of this unit 
combined with a proven effectiveness at eliminating waterborne diseases

®

 

has led to 

water purification systems being specified for field operations by many of 

the world’s major aid and emergency relief organizations.

Go Berkey

yourself

viruses, 

 T

 

and contaminates

Berkey

®

Contents:

1- Upper Chamber

1- Lower Chamber

1- Assembly instruction sheet

Assembly Instructions:

1. 

system

2.  

3.  Prime 

Black Berkey™ 

purification element 

(see reverse side of instruction

 

sheet).

4.  Place the large sealing washer (4) over the threaded portion of the element (3.)

5.  Place the element (3) into the hole in the base of the upper chamber (1).

6.  Secure element in the chamber base by screwing on the wing nut (5) onto the threaded mount.

 

7.  Place the upper chamber (1) onto the lower chamber (2)

 and place lid (

6

) in position.

1- Priming Button

1- Vinyl carrying case

 Extreme cleanliness is important. Wash hands and 

 before proceeding to  assure that contamination of 

the components  does not take place during  assembly.

Remove the purification element and parts from their protective packaging,  checking each item against the 

above list. 

1- Generic 

  

Sport Berkey

®

 water bottle

 

1- Purification element, wing nut and washer

1- Black Berkey Primer

1- Lid

Operation:

When lower chamber is partially filled, be cautious not to overfill upper chamber as this could cause lower chamber to overflow.  For example

,

 if the lower chamber 

is 1/3 full the upper chamber can be refilled by 2/3rds, if the lower chamber is ½ full, the upper chamber can be refilled by 

½

, etc.

GO BERKEY STAINLESS ASMBLY 03-14

NEW MILLENNIUM CONCEPTS, LTD.

NEW MILLENNIUM CONCEPTS, LTD.

 

®

Berkey  

Water Purifiers

“Simply the Best”

Notes:

 

1)

ower chamber be run to waste as well 

as the new water that is purified during the 
first 1 minute to also be run to waste. 

2) 

When installing purification elements for 

the first time or replacing used elements, 
always prime and condition the new 
purification elements.

3)

 After cleaning elements, it is recommended 

that the elements be re-primed. This will 
back-flush any process dust  from the pores 
of purification elements and prevent 
premature clogging.

 

If the system is left to stand for more than 

3 days, it is recommended that any water left 
in the l

 

Care and Use

 

F

ill the 

Sport Berkey

Portable 

Water Filter with water, screw on 
cap and tighten securely to 
eliminate leaks. Flush water 
through filter by pulling down lever, 
so that straw is exposed, and 
squeeze water through filter & out 
the straw. Repeat this flushing 
process twice before drinking. This
removes excess process dust
from the filter. After 2 flushes,
rinse the bottle & cap. Your filter
bottle is now ready for use.
Enjoy!

®

WARNING: Failure to read, thoroughly understand, and follow all instructions may result in personal injury, water 
damage, or voiding of the warranty! It is the assembler’s responsibility to make sure all components are properly 

®

assembled and installed using the instructions provided. While your 

Berkey

 system should not have any 

 

leaking problems, there is always the chance that a leak might occur due to being improperly assembled or 
perhaps a faulty part. In an overabundance of caution, we recommend that for the first 24 hours the filled system 
be placed in an area wherein if such a leak were to occur, the resulting spillage would not damage anything within 
the household.

Maintenance and Storage

The 

Sport Berkey

 Portable Water Filter 

has a shelf  life of  50 years. When the filter 
system will not be used for an extended period, 
remove filter and flush the unit with either a 
chlorinated solution of  1/4 tsp. per one half  
gallon of  water, or a 50/50 mix of  3% 
Hydrogen Peroxide and water. Rinse. Allow 
parts to dry thoroughly with cap removed. Re-
assemble and seal in an air tight container if  
possible. Do not allow filter to freeze, do not 
place in microwave oven and do not run hot 
water through the filter. 

Note: All contaminants 

that this filter has the ability to remove or reduce may 
not necessarily be in the user's water supply

.

®

Reviews: