Switch/shutter actuator 8/4gang 16A RMD
75318003
Switch/shutter actuator 16/8gang 16A
RMD
75310002
Technical
Documentation
© Berker GmbH & Co KG 2007
Version: 04.04.2007
Part 5
(Subject to prior change)
75310002.doc
Seite: 150 / 174
Fixed position of blind
as specified by
parameter
no change in current
position
The fixed blind position at the beginning of
shading can either be preset statically by a
separate parameter or basically adjusted to the
value prevailing at the time of shading
activation, i.e. remain unchanged.
At the beginning of shading, the parameterized
blind position will be approached.
At the beginning of shading, the current position
of the blind will be maintained. In this case, the
output behaves as if only the slat were
positioned as a result of shading.
This parameter is only visible, if the blind is to
approach a fixed position at the beginning of
shading.
This parameter is visible only in the 'Blind'
mode of operation.
Position of blind (0...100 %)
0...
50…100
This parameter sets the fixed position of the
blind to be approached at the beginning of
shading.
This parameter is only visible, if the
parameter "Fixed position of blind" is set to
"as specified by parameter".
This parameter is visible only in the 'Blind'
mode of operation.
Fixed position of slat
(0...100 %)
0...
50…100
This parameter sets the fixed position of the slat
to be approached at the beginning of shading
and, as the case may be, after positioning of the
blind.
This parameter is only visible, if the slat is to
approach a fixed position at the beginning of
shading.
This parameter is visible only in the 'Blind'
mode of operation.
Fixed position of shutter /
awning
as specified by
parameter
no change in current
position
The fixed position of the shutter or awning at the
beginning of shading can either be preset
statically by a separate parameter or basically
adjusted to the value prevailing at the time of
shading activation, i.e. remain unchanged.
At the beginning of shading, the parameterized
shutter / awning position will be approached.
At the beginning of shading, the current position
of the shutter or awning will be maintained. Any
travel movements in progress at the time of
shading activation will be finished.
This parameter is only visible, if the shutter or
awning is to approach a fixed position at the
beginning of shading.
This parameter is visible only in the "Shutter /
awning" mode of operation.