Berker 7531 00 01, Operating Instructions Manual, Page: 46 / 100

46
Operating the outputs
The device is in the permanent or temporary manual control
mode.

Press the key briefly < 1 s several times until the desired
output is selected.
The LED of the selected output A1...A8 or A1...A16 is flashing.
The LEDs ON/
▲
and OFF/
▼
indicate the status.

Operate the output with the ON/
▲
or OFF/
▼
key.
Switching outputs: switching on or off.
Shutter outputs:
Brief press:
blind/shutter stop
Long press: raising/lowering the blind/shutter
The selected output executes the respective commands.
The LEDs
ON/
▲
and
OFF/
▼
indicate the status.
Temporary manual control mode: After all outputs have been
selected one after another, the device quits the manual control
mode with the next brief press.
GB Operation