Film and Slide Scanner
H031
Instructions for Use
Please read and retain these instructions for future reference
v001: 14/08/20
3.
Insert the Slide/Negative Holder into the slot on the right of the device or insert photo tray into
photo tray slot from the top of the device.
4.
Apply the power to the film & photo scanner in two ways:
(1)
USB: Connect the film & photo scanner to PC with USB cable
(2)
5V adapter: Connect the adapter to the device with USB cable
5.
Press POWER button to turn on the film & photo scanner.
Note
: (1) When the Film scanner mode is selected, the Film scan indication LED is on.
2) When the Photo scanner mode is selected, the Photo scan indication LED is on.
6.
Follow the menu on screen for scanning.
7.
After finishing scanning, take out the memory card.
Note
: The film & photo scanner has a built-in memory for recording, when there is a memory card
inserted data will be saved onto the memory card.
8.
Or read pictures from PC by USB mode
9.
When capturing in either photo or film modes, please remember to push both slide switches to
the correct placement.
A notification will appear on-screen as a reminder to carry out the following:
1.
Photo: push both sliders to the right
2.
Film: push both sliders to the left.
Operation Guide
◆
Operation Guide Home/MODE: Main Menu
When the Film scanner mode is selected, the following main menu will appear:
① ② ③ ④ ⑤
⑥
① Language mode
② USB mode
③ Capture mode
④ Playback mode
⑤ Film Type
⑥ Resolution
When the Photo scanner mode is selected, the following main menu will appear:
