Portable DVD Player
G724
Instructions for Use
Please read and retain these instructions for future reference
v001: 12/03/20
Page No. 9
Press to return to the main menu when playing DVD.
Press repeatedly to switch/show the subtitles or turn off the subtitle function. (Note: this
function only works if the disc is encoded with subtitles.)
Press repeatedly to switch or hide the relative information of the playing disc.
Press this button to zoom in the scene. The available zoom ratios are: 2x, 3x and 4x in
zoomed-in mode, the direction kays can be used to move the zooming centre. (Note:
Applies to DVD, VCD, MPEG4, etc)
Press “REV” to search backward, “FWD” to search forward.
General Setup
Charging the unit
This player is powered by a lithium-polymer battery. It features a high ratio of energy to weight. It has no
memory effect and it can be recharged at any time regardless of whether it is fully or partially discharged. It
takes about 6 hours to fully charge the battery and a fully charged battery can be used for about 4-5 hours.
Connect the attached AC/DC adaptor to the DC INPUT jack on the unit, then plug the adaptor into a 240V AC
outlet.
Note: Make sure to switch off the unit before charging. The charging indicator LED will change from RED to
GREEN to indicate that the battery has been fully charged.
Usage and Maintenance of the rechargeable battery
1.
The working temperature of the rechargeable battery ranges from 0
°
C to 45
°
.
2.
Always unplug the unit when it is not being used unless it is being charged.
3.
Heat is inevitably produced during playback, this is normal. However switch off and allow it to cool
down.
4.
Avoid banging the battery and keep it away from heat and moisture.
Connection to TV
This unit can be connected to a TV in order to enjoy high quality music, movies etc with a TV.
Use an AV cable to connect the AV OUT jack on the unit to the AV IN jack of a TV.
DVD player has sound and video input jacks for connecting external audio and video inputs.
Menu Operation
1.
Press (SETUP) on the remote control or on the unit to show the setup menu.
2.
Press (LEFT)(RIGHT) to select an item. The submenu of the selected item will be instantly shown.