USER HANDBOOK 1.0 | ET2115
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
21-0099-82-00-00-003 |222002100_Anwenderhandbuch_Ethernet-Terminal-ET2115_EN.docx
26
7.
Press the “Expert” button to change the Lifeguard setting.
The page with the Expert settings appears.
– or –
Press the “Next” button and skip to the following page.
Fig. 15: Changing the Lifeguard setting
8.
Depending on the controller version, press the “Change” button to change the Lifeguard setting:
CODESYS V2: “Berghof VNC LG”
CODESYS V3: “Ping LG”
9.
Press the “Next” button to skip the following pages with until the page with the summary of the
network settings appears.
Fig. 16: Summary of the network settings
10.
If no settings were changed, press “OK”.
The main screen of the device will appear.
– or –
Press the “Save” button.
The settings will be saved and the device automatically restarts itself.
11.
Connect the device to the controller, using the network cable.
The device is now configured and ready for use.
