USER HANDBOOK 1.2 | B-PRIMIS DC/ET PRIME 2110W X C, 2115WUX C
Berghof Automation GmbH | Harretstraße 1 | 72800 Eningen | www.berghof-automation.com
270011X00_B-PRIMIS_ET-DC-PRIME 2110W-2115W_EN.docx
9
1.4. Qualified personnel
The installation, start-up and maintenance of the device must be carried out by qualified personnel.
For the purposes of this documentation and the safety instructions contained therein, “qualified per-
sonnel” means trained staff who are familiar with safety concepts in automation engineering and who
are authorised to assemble, install, start up, earth and identify devices, systems and electrical circuits
in accordance with standards set in safety engineering.
1.5. Duty of care
1.5.1. General
The user or processor (OEM) must ensure the following:
The device must only be used according to regulations.
The device must only be used in good working order.
The user handbook must always be kept legible and fully available.
Only sufficiently qualified and authorised personnel may carry out the assembly, installation,
start-up and maintenance of the device.
These authorised personnel must receive regular training on all relevant occupational health and
safety and environmental protection issues and must be fully familiar with the contents of this us-
er handbook, particularly the sections regarding safety features.
Any markings or identification labels and safety and warning signs on the device must not be re-
moved and must be kept legible at all times.
The national and international regulations regarding the operating of machinery and facilities
where the device is being used must be observed at all times.
The user must always be kept abreast of any current relevant information regarding the device
and its use or operation.
The user takes direct responsibility for agreeing with the competent authorities the use of safety-
related control components, and for compliance with their instructions.
