USER MANUAL 1.2 | B-NIMIS MC-PI AND BC-PI SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
9
1.5. Duty of care
The user or processor (OEM) must ensure the following:
→
The device must only be used for its intended purpose.
→
The device must only be used in a perfect, fully functional condition.
→
The user handbook must always be kept legible and fully available.
→
Only sufficiently qualified and authorised personnel carry out assembly, installation, start-up
and maintenance of the device.
→
These authorised personnel must receive regular training in all relevant questions of occu-
pational health and safety and environmental protection and must be familiar with the con-
tents of this user handbook, particularly the sections containing safety instructions.
→
Any markings or identification labels and safety and warning signs on the device must not
be removed and must be kept legible at all times.
→
The national and international regulations regarding the operation of machinery and installa-
tions where the device is being used must be observed.
→
The user must always be kept abreast of any current relevant information regarding the de-
vice and its use or operation.
→
The user is responsible for coordinating the use of the safety-related control components
with the responsible authority and for adhering to its specifications.
