USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
9
1.4 Qualified personnel
This manual is intended for qualified personnel and contains information on the assembly, installa-
tion, commissioning and maintenance of the equipment.
Qualified personnel by definition of this documentation and the safety instructions it contains are
trained specialists who are familiar with the safety concepts of automation technology and who are
authorized to assemble, install, commission, ground and mark devices, systems and circuits in ac-
cordance with the standards of safety technology.
1.5 Duty of care
The operator provides this user manual or excerpts from it to the persons who perform tasks with
or in connection with the equipment. The operator keeps this user manual or relevant parts of it
within easy reach in the immediate vicinity of the equipment. When handing over the equipment to
another person, the operator passes this user manual on to this person.
The user (OEM) must ensure the following:
The device must only be used according to regulations.
The device must only be used in good working order.
The user handbook must always be kept legible and fully available.
Only sufficiently qualified and authorized personnel may carry out the assembly, installation,
start-up and maintenance of the device.
These authorized personnel must receive regular training on all relevant occupational health
and safety and environmental protection issues and must be fully familiar with the contents of
this user handbook, particularly the sections regarding safety features.
Any markings or identification labels as well as safety and warning signs on the device must
not be removed and must be kept legible at all times.
The national and international regulations regarding the operating of machinery and facilities
where the device is being used must be observed at all times.
The user always has any current relevant information regarding the device and its use or
operation at his disposal.
The user takes direct responsibility for agreeing with the competent authorities, the use of safety-
related control components, and for compliance with their instructions.
