USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
21
5.1.3 Operation as WLAN Access Point
Fig. 5: Operation as WLAN Access Point
1. IP address and netmask of the controller that sets up the WLAN access point.
2. WLAN SSID and WLAN password with which a client must authenticate itself. A
connection can only be established with WPA2 encryption enabled.
3.
IMPORTANT: Select WLAN Country according to the operating location!
4. DHCP settings of the WLAN access point.
5. Accept and save the configuration - the settings are active after a restart of the controller.
