Berg Engineering & Sales Company NS-11006, Instruction Manual, Page: 15 / 90

Operating
NewSonic SonoDur-R Issue 105 06/2020 Page 15
In order to return to the normal measuring mode, the program must be terminated and switched to
measuring mode after a test probe was connected.
Tap the EXIT button, the question Exit Program must be acknowledged with Yes. After connecting a
probe, the measuring program should start automatically.
i NOTE!
In order to return to the normal measuring mode, the program must be terminated and switched to
measuring mode after a test probe was connected.
Figure 6.2
Figure 6.3