1
ENGLISH
BERETTA ACS 35 T LOW ENERGY
The
ACS 35 T
is an instant domestic hot water mixer. It uses a brazed, stainless steel plate heat exchanger and is ideal
for use in combination with DHW storage cylinders.
Temperature of the hot water delivered to the taps is regulated by the thermostatic mixing of water in the primary circuit.
The primary circuit pump is controlled by a flow switch in the DHW circuit, connected in series to the pump. The product
is equipped with two filling/drain cocks. When the shut-off valves are closed, these can also be used to flush out the heat
exchanger.
A domestic hot water recirculation kit is available for further convenience.
The
ACS 35 T
instant hot water mixer comes complete with an insulated frame.
Description
Qty.
1 DHW mixer in packing
1
2 Instruction manual
1
DESCRIPTION
CONTENTS OF THE KIT
GENERAL SAFETY INFORMATION AND PRECAUTIONS
READ THIS MANUAL THOROUGHLY BEFORE PERFORMING ANY WORK ON THE PRODUCT.
The manufacturer reserves the right to modify the product without notice for the purpose of introducing technical im-
provements or to facilitate production, installation and positioning. The illustrations in this manual may therefore differ
slightly from the actual product. The safety of the product and the accuracy of the instructions provided are nevertheless
guaranteed.
This manual forms an integral part of the product itself and must be kept in a safe place in order to avoid damage and to
permit rapid consultation throughout the working life of the product.
Ideally, this manual should be kept with the product where it can be consulted whenever needed. The manual should
always accompany the product if sold or transferred to a new owner, or stay with it if the owner moves house and leaves
it behind, so that the next user can consult it.
cod. Doc-0072122 - Rev. 5 (04/2015)
