97
Installation
6003417_a – 26.09.2017
EN
3.4.3
Remove inside parts
D
ATTENTION!
Danger of property damage through falling parts!
When moving the device, the front panel may open and
parts lying inside could fall out.
☞
Remove the parts lying inside before installation.
☞
Open the front panel.
☞
Lift the lower section out at the rear edge.
☞
Take hold of the lower section at the sides to remove it.
The Capillar Traps are inserted and held in place in the device
by magnets.
☞
Grasp the Capillar Traps on the sides with both hands.
☞
Pull the Capillar Traps out.
☞
Remove the two screws.
☞
Remove the cover.
☞
Remove the filter.
If the recirculated air filter permalyt is used:
☞
Unplug the connection cable.
Summary of Contents for Smartline BKH 80 ST
Page 112: ...6003417_a 26 09 2017 ...