45
Product information
6003192_e – 16.05.2019
EN
2.
Product information
2.1
Product overview
The device provides additional functions for the extractor
hood. All of the device’s functions are controlled by the
extractor hood.
Observe the extractor hood instructions.
The filter medium in the recirculated air filter neutralises any
odour particles present. The odour-free, cleaned room air is
fed back into the room. The humidity in the room can be
reduced with the fresh air feed.
Filter mats, special active charcoal and a catalytic converter
are used in the device for effective odour absorption. After a
certain number of operating hours, the regeneration process
takes place in the closed filter. The catalytic converter starts to
regenerate the filter medium automatically.
The regeneration process starts after approx. 30 minutes
of constant operation or after approx. 60 minutes of total
operating time, directly after turning the extractor hood off.
The regeneration process takes approx. 120 minutes. The
generation of heat and noise is perceivable at the device
during this time.
B
A
C
D
E
A Ventilation flap
B Recirculated air filter permalyt®
C Air inlet (on the underside of the device)
D Mains cable with shock-proof plug for connection to the
power supply
E Cable for connection to the extractor hood
2.2
Scope of delivery
A
C
B
D
A Recirculated air filter permalyt®
B Seal (not in integrated hood BEH FLU)
C Installation instructions
D Supporting bracket (not for integrated hood BEH FLU)
2.3
Technical data
BUR 125
BUR 150
Connection voltage
230 V / 50 Hz
230 V / 50 Hz
Power consumption
approx. 125 W
approx. 125 W
Air inlet
ø 125 mm
ø 150 mm
Width
308 mm
308 mm
Depth
195 mm
195 mm
Height
310 mm
310 mm
Net weight
6 kg
6 kg
Information on the model (e.g. serial number, year of
construction) is quoted on the front panel.
Summary of Contents for permalyt BUR 125
Page 52: ...6003192_e 16 05 2019 ...
