Berbel BWH 90 GL Page 16 Operating And Installation Instructions Download

Page: 16 / 32

Installation

6005737_0 – 31.03.2021

Hybrid mode

☞

Fit the exhaust air ducting onto the collar of the hybrid
filter from above.

All variants

☞

Ensure that the exhaust air duct is correctly fitted.

3.5.9

Establish electrical power supply

☞

Observe the voltage specifications on the ratings plate.

☞

Plug the connecting cable mains plug into the socket.

☞

Route the cable such that it is not kinked, crushed or
damaged and so that it will not get in the way when
replacing the filter filling.

☞

Make sure that the device can be disconnected on all
poles from the electricity supply after installation.

The device is ready for operation.

3.5.10 Mounting the chimney

ATTENTION!

Danger of damage due to improper handling!

The body of the hood and the chimney could be damaged
by movements during the installation.

☞

Keep a distance between the chimney and the body of
the hood.

☞

Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).

The chimney comprises two chimney ducts that slide inside
one another. There are two ventilation slots inside the inner
chimney duct.

The chimney ducts are aligned with one another depending
on the operating mode.

Recirculating mode and hybrid mode
The ventilation slots are located at the top and are not
covered.

Extracted air mode
The inner chimney duct can be drawn out and re-inserted
upside-down in order to cover the ventilation slots.

☞

Lift the chimney up with two persons.

☞

Place the lower edge of the chimney into the groove of
the device.

☞

Pivot the chimney flush against the wall.

Summary of Contents for BWH 90 GL

































Search results

Summary of Contents for BWH 90 GL

Reviews:

Related manuals for BWH 90 GL

Brands by name

Popular brands

Berbel BWH 90 GL, Operating And Installation Instructions

Search results

Summary of Contents for BWH 90 GL

Reviews:

Related manuals for BWH 90 GL

Brands by name

Popular brands