Berbel BAL 150, Installation Instructions For The Models, Page: 37 / 44

37
EN
Installation
6002948_a – 20.11.2019
3.5.1 Preparation for installation
☞
Familiarise yourself with the installation situation and the
associated documents:
y Device and instructions
y Cooker hood instructions
☞
Assemble the tools and materials required:
y Folding rule or measuring tape
y Pencil
y Spirit level
y Ø 10 mm masonry bit
y Hammer drill
y 6 mm spanner
y 13 mm box spanner
y 2.5 mm Allen key
y Construction foam or assembly adhesive
☞
Ensure that the cooker hood is installed properly.
☞
Ensure that the cooker hood is prepared to be connected
to the mains and control cables.
☞
Keep the installation area free of objects that could be in
the way or that could be damaged.
☞
Make sure that the hob and other parts that could be
touched have cooled down.
☞
Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).
☞
Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.
50
1-2°
1-2°
165
150
☞
Ensure that the exhaust air duct is prepared correctly in
the wall duct:
y Angled 1-2° outwards
y Inner diameter 150 mm
y Flush with the outside wall
y Internal projection approx. 50 mm
y Fixed with construction foam or assembly adhesive
3.5.2 Unpack the device
D ATTENTION!
Hazard of glass breaking or other damage due to
incorrect handling!
The device and its surfaces can be damaged when being
unpacked or transported.
☞
Do not cut into the protective cardboard packaging.
☞
Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).
☞
Unpack the device and all accompanying parts carefully.
☞
Set the device down on a firm, clean and protective
surface (e.g. thick cardboard).
☞
Check the device and its constituent parts for damage.
☞
Check the delivery is complete.
D
“2.2 Scope of delivery” (page 33).
If parts are missing or damaged:
☞
Please consult your dealer or customer services.
☞
Remove the packaging material.
D
“7.1 Dispose of packaging” (page 42).
3.5.3 Install the device
173
127
113 113
78 78
10
30
73
8
☞
Determine the hanging position.