Beper 50.923, Use Instructions

Page: 9 / 32

ENGLISH
Vacuum Cleaner Use instructions
9
WARNING:
Important:
If the suction openings of the unit, the hose or the chrome telescopic tube are blocked,
switch off the vacuum clearer and remove the blocking substance before you start the unit
again.
1. Do not operate the vacuum cleaner too close to hearter or radiators.
2. Before inserting the power plug into the wall outlet, make sure that your hands are dry.
3. Before you start the unit, make sure to remove large or sharp objects that might dama-
ge the dust tank and hose.
4. When pulling out the power plug from the wall outlet, pull the plug not the power cord.
5. Do not use without all filters in place.
6. When using, if you learn of squeak from the cleaner, it must be suction appears to be reduced, so
you must stop (make sure the cleaner is not plugging), then clean the all air filter.
Note:
If the supply cord is damaged, it must be replaced by manufacture, its service agent or similarly
qualified person in order to avoid a hazard.
WARNING:
Hold the plug when rewinding the cord. Do
not allow the cord to whip when rewinding.
Description
A Vacuum cleaner base
B Extendable tube
C Hose set
D Manual air regulator
E Hose head
F Automatic cord rewind
G On/off switch
H Transportation handle
I Deposit
J Extraction button for deposit
K Opening button for deposit
L Wheels
M Plug housing
N Vacuum cleaner base for parquet
O Lance + Multi-use brush
P Grill outlet filter
Q Outlet filter
R Motor filter