n
Enable Installer (Teleservice) (2.2)
This
option
will allow you to Enable/Disable the In-
staller to access the panel
locally
, using the keypad (
In-
staller Level
-default) and
remotely
, by Teleservice
calls, and PIN Transfer (ask the Installer).
+
The Installer CANNOT be enabled/disabled during
a DTMF session.
1.
Press
A
or
B
to view the
ON/OFF Installer
option.
USER
2.2
ON/OFF Installer
2.
Press:
Ø
OFF
to disable the Installer access;
Installer
Disabled
Ø
ON
to enable the Installer access.
Installer
Enabled
3.
If the Installer is enabled, press
ENTER
to proceed
to the next step; otherwise, press
ESC
to return to
the User menu.
ON/OFF
PIN Transfer
4.
Press:
Ø
ON
to
enable
PIN Transfer
PIN Transfer
Enabled
Ø
OFF
to
disable
PIN Transfer
PIN Transfer
Disabled
5.
Press
ESC
to return to the User Menu.
n
Auto-Arm (2.3)
Your Installer may have set up Partitions to turn
ON/OFF at preset times (scheduler).
+
The Auto-Arm option will disarm the Partitions at
set time, even if they are in alarm status.
This option will allow you to turn the Scheduler
ON/OFF. If ON, on the LCD keypads, a star (
*
) will blink
near the time.
1.
Press
A
or
B
to view the
ON/OFF Auto Arm
option.
USER
2.3
ON/OFF Auto Arm
2.
Press:
Ø
ON
to Enable the Scheduler;
Auto Arming
Enabled
Ø
OFF
to Disable the Scheduler.
Auto Arming
Disabled
3.
Press the
ESC
to step back to the User menu.
48
Expandable Hybrid Control Panels
