72
Trend Chart:
Select either Vib.
–
Time or Vib.
–
RPM. If Vib- RPM is selected,
you must have a tachometer connected to generate a RPM signal to trigger the
measurement, otherwise, you will not observe a measurement.
The above display shows a trend chart of acceleration, Velocity and displacement of
channel 1 on the left. The display on the right shows a bar char of channel 1
(velocity) as this was selected under unit. You can also switch between bar chart
and trend chart by pressing the soft key on the display.
Bar Chart: Displays the value in a bar chart format
Ch1 All
: Displays all values for channel 1: Acceleration, Velocity, Displacement
Ch2 All
: Displays all values for channel 2: Acceleration, Velocity, Displacement
Ch3 All
: Displays all values for channel 3: Acceleration, Velocity, Displacement
Ch4 All
: Displays all values for channel 4: Acceleration, Velocity, Displacement
Multi-Channel:
Display multiple channels at the same time. To show each channel,
select Ch1 for channel one, Ch2, for Channel 2 etc. Notice that the display shows
Ch1, Ch2, and Ch3 for displacement (as selected under units).
Summary of Contents for Impaq Elite
Page 49: ...49 Data Recorder program...