BENSHAW ENHANCED KEYPAD, Manual

Page: 6 / 24

LEDs On the Enhanced Keypad
1.3 LEDs on the Enhanced Keypad
The enhanced keypad features three LEDs to provide status information. The
following table describes these three LEDs.
4
1 - INTRODUCTION
Key Description
The FWD key commands the motor to begin running in the Forward direction.
The STOP key, if enabled by parameter Stop Key (see RSi SX Parameter Configuration
manual), commands the motor to stop using the type of stop configured by parameter Stop
Mode (see RSi SX Parameter Configuration manual) and using the active deceleration ramp.
If a fault occurs, the STOP key resets the fault.
Table 1: Functions of the Keys on the Enhanced Keypad
FWD
LED Name Duration Operating Condition
POWER Continuous The drive is powered-up.
WARNING Continuous
Abnormal operation is detected, but the abnormality is
greater than a warning. The drive will halt operation
when a fault is detected.
FAULT Continuous
Abnormal operation is detected, but the abnormality is
greater than a warning. The drive will halt operation
when a fault is detected.
Table 2: LEDs on the Enhanced Keypad
STOP