Tra
ve
l A
ng
el S
eri
es T
ripo
ds
(In
clu
di
ng
T
ran
sfun
cti
onal
M
od
els
)
75 Virginia Road
North White Plains, NY 10603
T 914.347.3300
F 914.347.3309
[email protected]
BenroUSA.com
Interchangeable Spiked and Rubber Feet
(select models)
(MAIN FIGURE)
Most Benro tripods include interchangeable
Stainless Steel Spiked or Rubber Feet.
They provide the right contact depending
on the surface or terrain that the tripod
will be used in. To remove the Rubber Feet
simply unscrew each Rubber Foot counter-
clockwise and replace with the provided
Spiked Feet. Tighten the Spiked Feet using
the included Wrench.
Transfunctional Feature – Converting to
a Monopod (select models)
(FIGURE 9)
To assemble as a monopod first unscrew
the Ballhead and Top Plate from the center
column. Unscrew the Single tripod leg (the
one with the foam grip). Screw the Ballhead
and Top Plate onto the top of the Single Leg.
USER NOTICE
• Do not exceed the maximum specified
load capacity (see specifications at
www.BenroUSA.com).
• Always ensure that Leg and Head Locks
are tightly engaged before mounting any
gear on your Tripod.
• Always clean and dry any Tripod after it
has been exposed to wet, dusty, sandy
or salty conditions. Your Tripod is not
recommended for use in salt water. If
required, clean tripod using a mild soap
solution applied with a soft cloth, rinse
with fresh water and dry with soft towel.
Remove any dust, dirt or sand from all Leg
Locks, Leg Sections and all moving parts.
• Do not leave any Tripod in the sun for
prolonged periods and avoid high
temperature exposure.
• Avoid leaving any Tripod or Monopod
unattended in areas where people could
trip over the gear and get hurt.
• Remove camera, lens, and all gear from
any tripod when transporting.
• For your safety, don’t let your Benro
gear come in contact with any electrical
power source.
O
p
er
at
ing
In
st
ruc
tion
s &
U
ser
N
ot
ic
e
Operating Instructions
Thank you for making Benro your choice for professional photographic
equipment. Your Benro gear is manufactured to provide years of
dependable service. In order to obtain optimum satisfaction and
performance, we suggest that you carefully read these instructions.
Specifications and design are subject
to change without notice.
9
