BenQ W1400 User Manual Download | Manualshive

Page: 46 / 63

background image

46

Important safety instructions

System Setup menu

Advanced Setup menu

Function

Description

Language

Sets the language for the On-Screen Display (OSD) menus. See

menus" on page 23

for details.

Splash Screen

Allows you to select which logo screen will display during projector start-up.
You can choose

BenQ

logo screen,

Blue

screen or

Black

screen.

Projector Position

The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See

"Choosing a location" on page 13

for details.

Auto Off

Prevents unnecessary projection when no signal is detected for a long time. See

"Setting Auto Off" on page 50

for details.

Sleep Timer

Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.

Menu Settings

Menu Display Time

Sets the length of time the OSD will remain active after your last key press.

Menu Position

Sets the On-Screen Display (OSD) menu position.

Blank Reminder Message

Sets whether the blank reminder message is displayed by the projector while
the image is hidden.

Input Source

Selects an input source to be projected. See

"Selecting an input source" on

for details.

Source Rename

Renames the source to your desired name. See

"Selecting an input source" on

for details.

Auto Source Search

Sets whether the projector searches automatically for input sources. If the
source scan is

On

, the projector will scan for input sources until it acquires a

signal. If the function is not activated, the projector selects the last used input
source.

Function

Description

Lamp Settings

Reset Lamp Timer

Once the lamp is renewed, select

Reset

to return the lamp timer to "0". See

"Resetting the lamp timer" on page 53

for details.

Equivalent Lamp Hour

Shows the lamp hour information. See

"Getting to know the lamp hour" on

for details.

HDMI Settings

HDMI Format

Selects an input source type for the HDMI signal. You can also manually select
the source type. The different source types carry different standards for the
brightness level.

HDMI Format is only available when the HDMI signal is selected.

CEC

Enables or disables the CEC function. When you connect an HDMI CEC-
compatible device to your projector with an HDMI cable, turning on the HDMI
CEC compatible device automatically turns on the projector, while turning off
the projector automatically turns off the HDMI CEC compatible device.

Baud Rate

Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.

«
...
44
45
46
47
48
...
»

Summary of Contents for W1400
































































Reviews:

No comments

Related manuals for W1400

Brand: Panasonic Pages: 15

Brand: Datalogic Pages: 56

Brand: Datalogic Pages: 4

Brand: Karma Pages: 8

Brand: Micca Pages: 14

Brand: Rollei Pages: 91

Brand: Foxtech Pages: 10

Brand: Dynascan Pages: 31

Brand: Goldmund Pages: 21

Brand: Barco Pages: 137

Brand: Optoma Pages: 4

Brand: Polaroid Pages: 46

Brand: Zeiss Pages: 41

Brand: Digital Blue Pages: 2

Visualizer VZ-5B

Brand: WolfVision Pages: 5

Brand: SVS Pages: 16

Brand: Olympus Pages: 2

Brand: Panasonic Pages: 285

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands