4
Important safety instructions
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information technology
equipment. However, to ensure safe use of this product, it is important that you follow the instructions
mentioned in this manual and marked on the product.
1.
Please read this manual before you
operate your projector.
Save it for future
reference.
2.
Do not look straight at the projector
lens during operation.
The intense light
beam may damage your eyes.
3.
Refer servicing to qualified service
personnel.
4.
Always open the lens shutter (if any)
or remove the lens cap (if any) when
the projector light source is on.
5. The light source becomes extremely hot
during operation.
6. In some countries, the line voltage is NOT
stable. This projector is designed to operate
safely within a mains voltage between 100 to
240 volts AC, but could fail if power cuts or
surges of
±
10 volts occur.
In areas where
the mains voltage may fluctuate or cut
out, it is recommended that you
connect your projector through a
power stabilizer, surge protector or
uninterruptible power supply (UPS).
7. Do not block the projection lens with any
objects when the projector is under
operation as this could cause the objects to
become heated and deformed or even cause
a fire.
8. Do not operate light sources beyond the
rated light source life.
