BenQ V2410T, User Manual

Page: 15 / 54

15 Getting the most from your BenQ monitor
How to install on Windows XP system
1. Open
Display Properties
.
The quickest shortcut to
Display Properties
is through the Windows desktop.
Right-click the desktop and select
Properties
from the popup menu.
Alternatively, the Windows menu to
Display Properties
is located in
Control Panel
.
In Windows XP version,
Control Panel
is located directly under the main
Start
menu item.
The menu options displayed will depend upon which type of view is selected for your system.
•
Under the Classic view, click
Start
|
Control Panel
|
Display
.
•
Under the Category view, click
Start
|
Control Panel
|
Appearance and Themes
|
Change
the screen resolution
.
The
Display Properties
window will display.
2. Click the Settings tab and the Advanced button.
The
Advanced Display Properties
window will display.
3. Click the Monitor tab and select the Plug and Play Monitor from the list.
If there is only one monitor in the list, it will already be selected for you.
4. Click the Properties button.
The
Monitor Properties
window will display.
If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper
drivers are already installed, and you need do nothing further. Cancel out of these property windows.
However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you
will need to continue with these instructions.
5. Click the
Driver
tab and the
Update Driver
button.
The
Hardware Update Wizard
will display. Follow the wizard instructions noting the steps below:
6. Check the option Install from a list or specific location and click Next .
7. Check the option
Search for the best driver in these locations
and also check
Search
removable media , then click Next .
Please wait while the wizard searches for drives. When completes, the wizard should have found and
selected the BenQ driver appropriate to your monitor model. This will install the appropriate monitor
driver files to your computer.
8. Click Finish .
This will close the wizard and return you to the
Monitor Properties
window.
9. Click Close , OK , and OK .
This will close the
Display Properties
windows. You may be prompted to restart your computer
after the driver update is complete.