Setting up the display
8
Installing an external PC
You can mount an external PC to the display using either one of the following methods:
• The back of the display has four screw holes at its bottom-left side with a dimension
of VESA mount 100x100mm. You can secure the PC onto the display with four screws
(maximum torque: 4-5 kgf-cm).
• The package includes a steel pad that supports VESA mounting (dimension
100x100mm). You can install the steel pad to the external PC with four screws and
then secure the PC with steel pad assembly onto the top-right side of the display with
two M3x6 screws (maximum torque: 4-5 kgf-cm).