BenQ RE6501 User Manual Download Page 63

Page: 63 / 79

Working with Android OS

- Operate the display by using your mobile device as a remote control.

You can also tap

Setting

(

) in the lower right corner of the display to modify the

settings for

InstaShare

, such as the

InstaShare

ID name, connect code, or mirroring

confirmation message.

InstaQPrint

Tap

to launch

InstaQPrint

. With this application, you can print a file or website

image using a Wi-Fi or remote printer.

1. Tap the option on the left panel and browse and select the desired file, photo, page,

or image you want to print.

Once connected, any operations on the display or mobile device will also show up on your

mobile device and display.

• Before launching the application, make sure your display is properly connected to lnternet.
• For the list of supported printers, see https://printhand.com/list_of_supported_printers.php.

Summary of Contents for RE6501
















































































Search results

Summary of Contents for RE6501

Reviews:

Related manuals for RE6501

Brands by name

Popular brands

BenQ RE6501, User Manual

Search results

Summary of Contents for RE6501

Reviews:

Related manuals for RE6501

Brands by name

Popular brands