Start for interactive function
12
Start for interactive function
To use the PointWrite, the proper setting of the PointWrite configuration is needed. The
Configuration setting window will help you to set up PointWrite correctly.
Configuration setting
1.
PointWrite configuration
: Select the PointWrite type that you're going to use.
2.
PointWrite Language
: The default language is the same as the language for your
operating system. If you want to change the language, click on
and
then language list will display.
After selecting your preferred language, quit the
PointWrite and start the PointWrite again
.
3.
PointWrite Option
:
•
Program auto run
: Click this item if you want the PointWrite to run
automatically when Windows starts.
•
Ceiling Mount Mode
: Click this item if you mount the projector on the
ceiling. When the projector is placed on the table, do not click this item.
•
Rear Screen Mode
: If the projector is installed on the rear screen system,
click this item.
4.
Information
: Shows the driver and camera firmware version.
1
2
3
4
Summary of Contents for PointWrite
Page 1: ...PointWrite User Manual...
