26 Menu
operation
Menu operation
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
Basic menu
Brightness
The higher the value, the brighter the image. Adjust this control so the black areas
of the image appear just as black and that detail in the dark areas is visible.
Aspect Ratio
There are several options to set the image's aspect ratio depending on your input
signal source.
•
Auto
: Scales an image proportionally to fit the
projector's native resolution in its horizontal or
vertical width.
•
Real
: Projects an image as its original resolution
and resizes it to fit within the display area. For
input signals with lower resolutions, the
projected image will be displayed in its original
size.
•
4:3
: Scales an image so that it is displayed in the
center of the screen with a 4:3 aspect ratio.
•
16:9
: Scales an image so that it is displayed in the
center of the screen with a 16:9 aspect ratio.
•
16:10
: Scales an image so that it is displayed in
the center of the screen with a 16:10 aspect ratio.
15:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
