26 Menu
operation
Menu operation
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
Basic menu
Brightness
The higher the value, the brighter the image. Adjust this control so the black areas
of the image appear just as black and that detail in the dark areas is visible.
Aspect Ratio
There are several options to set the image's aspect ratio depending on your input
signal source.
•
Auto
: Scales an image
proportionally to fit the
projector's native resolution in its
horizontal or vertical width.
•
Real
: Projects an image as its
original resolution and resizes it to
fit within the display area. For
input signals with lower
resolutions, the projected image
will be displayed in its original size.
•
4:3
: Scales an image so that it is
displayed in the center of the
screen with a 4:3 aspect ratio.
•
16:9
: Scales an image so that it is
displayed in the center of the
screen with a 16:9 aspect ratio.
•
16:10
: Scales an image so that it is
displayed in the center of the
screen with a 16:10 aspect ratio.
15:9 picture
(MX604/
MX604w)
(MW605/
MW605w)
(MH606/
MH606w)
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture