Operation
39
Utilizing FAQ function
The Information menu contains possible solutions to problems encountered by users
regarding image quality, installation, special feature operation and service information.
1.
To enter the Information menu, press
Left
/
on the projector or remote contorl.
2.
Press
Up or
Down to select FAQ-Image
and Installation or FAQ-Features and Service.
3.
Press Mode/enter.
4.
Press
Up or
Down to select the a problem
and press Mode/enter for possible solutions.
5.
Press Menu/exit to exit the OSD.
You can also press Menu/exit to open the OSD menu
and enter the Information > FAQ-Image and
Installation and Information > FAQ-Features and Service menus.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 1500 m
–3000 m above sea level, and temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under
such condition.
To activate the High Altitude Mode, go to
SYSTEM SETUP: Advanced > High Altitude
Mode,
select On by pressing
Left/
Right on the projector or remote control. A
confirmation message displays. Highlight Yes and press
Mode/enter
.
Operation under "High Altitude Mode" may cause a higher decibel operating noise level
because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
We recommend you use the High Altitude
Mode by selecting it whenever your
environment is higher than 1500 m.
Do you want to turn the High Altitude
Mode on?
Yes
No
WARNING
