Accessing the Internet with a wireless connection
40
Accessing the Internet with a wireless
connection
When a wireless network is set up for your projector as described in the
section, connections to the projector by your computer or mobile device will
lack internet access. You can obtain Internet access for the network either via
QCast
or
the projector’s OSD menu options.
Accessing the Internet via
QCast
1.
Make sure the projector is installed with BenQ WDRT8192 USB wireless dongle and
a wireless network is set up for the projector. See
"Setting up a wireless network for
for details.
2.
Make sure your computer or mobile device is connected to the wireless network
created by the designated USB wireless dongle. See
mobile device to the projector wirelessly" on page 9
for details.
3.
Launch
QCast
. Go to the
Network Setup
page in the
Advanced
menu and
configure the network settings. See
"Accessing the Internet via Network Setup" on
for details.
Accessing the Internet via projector OSD
1.
Press
MENU
on the projector.
2.
Highlight
Network
and press
OK
.
3.
Highlight
Wireless LAN
and press
OK
.
4.
Highlight
Client
and press
OK
.
5.
Highlight
Network (SSID)
and press
OK
.
6.
Select a wireless network with Internet access and press
OK
.
7.
Enter the password for the wireless network.
8.
Highlight
Commit
and press
OK
.
9.
Return to the
Client
page. Check if the
Status
is
Connect
and the SSID of the
desired wireless network is displayed. If so, the projector is connected to the desired
wireless network.
10. Connect your computer or mobile device to the projector.
Tablet
Laptop computer
Projector
Smartphone
Wireless Dongle
Internet
Wireless LAN
