9
Introduction
Controls and functions
Projector & Remote control
1.
MENU
Turns on the On-Screen Display (OSD) menu.
2. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
Keystone keys (
,
)
Displays the keystone correction page.
Volume keys (
/
), (
/
)
Decreases or increases the projector volume.
3.
BACK
Goes back to previous OSD menu, exits and
saves menu settings.
4.
POWER
Toggles the projector between standby mode
and on.
ON
/
Off
Toggles the projector between standby mode
and on.
5.
AUTO
Automatically determines the best picture
timings for the displayed image when PC signal
(analog RGB) is selected.
6.
OK
Confirms the selected On-Screen Display
(OSD) menu item.
7.
SOURCE
Displays the source selection bar.
8.
ASPECT
Selects the display aspect ratio.
9.
PICTURE
Selects an available picture setup mode.
10.
MUTE
Toggles projector audio between on and off.
11.
Numeric buttons
Enters numbers in network settings or when
setting the remote control ID. Numeric
buttons 1, 2, 3, 4 cannot be pressed when
asked to enter password.
1
3
4
2
6
5
7
15
16
5
18
20
21
22
17
14
19
23
7
4
2
6
8
1
9
10
13
12
3
11
All the key presses described in this document
are available on the remote control or projector.
