60 Playback mode
Engli
sh
4. Press
to confirm the change and save the image file.
Active Display
When Active Display is on and the camera is in the playback mode, you can
shake the camera clockwise (when the camera is held horizontally) to move to
the previous file. To move to the next file, just shake the camera
counterclockwise (when the camera is held horizontally).
To apply a Radial Blur effect:
1. Slide the mode switch to
.
2. Press
>
>
Active Display
>
or .
3. Select
On
to enable Active Display or
Off
to disable Active Display.
4. Press .
You cannot use this function on images captured in Panorama mode.
Clockwise: move from the current file (No.
3) to the previous file (No. 2).
Counterclockwise: move from the current
file (No. 3) to the next file (No. 4).
LS200 UM - EN.book Page 60 Wednesday, November 30, 2011 10:52 AM
