Operation
37
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1.
Go to the
SYSTEM SETUP: Basic > Presentation Timer
menu and press
MODE/ENTER
to display the
Presentation Timer
page.
2.
Select
Timer Period
and decide the timer period by pressing
/
. The
length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to
240 minutes in 5-minute increments.
3.
Press to select
Timer Display
and choose if you want the timer to show up
on the screen by press
ing
/
.
4.
Press to select
Timer Position
and set the timer position by pressing
/
.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
5.
Press to select
Timer Counting Direction
and select your desired
counting direction by pressing
/
.
6.
Press to select
Sound reminder
and decide if you want to activate sound
reminder by pressing
/
. If you select
On
, a double beep sound will be
heard at the last 30 seconds of counting down/up, and a triple beep sound will
be produced when the timer is up.
7.
To activate the presentation timer, press and press
/
to select
On
and
press
MODE/ENTER
.
8.
A confirmation message displays. Select
Yes
and press
MODE/ENTER
to
confirm. You will see the message “
Timer is On
” displaying on the
screen. The
timer starts counting at the time the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the
SYSTEM SETUP: Basic
>
Presentation Timer
menu and press
select to select
Off
. Press
MODE/ENTER
. A confirmation message
displays.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
1 Min/2 Min/3
Min
Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decrease from the preset time to 0.
