![background image](http://html.mh-extra.com/html/benq/ht4050/ht4050_user-manual_2733765053.webp)
Menu Functions
53
System Setup : Basic menu
Submenu
Functions and Descriptions
3D Sync Mode
Select
DLP-Link
or
3D VESA
for DLP-Link or 3D VESA glasses.
Background Color
Sets the background color when there is no signal to the projector.
Splash Screen
Allows you to select which logo screen displays during projector start-up. You can
choose
BenQ
logo screen,
Blue
screen, or
Black
screen.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See
"Choosing a location" on page 16
for details.
Auto Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Power Off" on page 63
for details.
Direct Power On
When the function is set to
On
, the projector will be turned on automatically
once the power is fed through the power cable. When the function is set to
Off
,
you’ll have to turn on the projector by pressing
on the projector or
on
the remote control.
Menu Settings
•
Menu Type
Switches to the
Basic
OSD menu.
•
Menu Position
Sets the On-Screen Display (OSD) menu position.
•
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
•
Blank Reminder Message
Sets whether the reminder message is displayed by the projector while the image
is hidden.
Source Rename
Renames the current input source to your desired name.
On the
Source Rename
window, use
▲
/
▼
/
◄
/
►
to set the desired characters
for the connected source item.
When done, press
OK
to save the changes.
Auto Source Search
Sets whether the projector searches automatically for input sources.
Select
On
to enable the projector to scan for input sources until it acquires a
signal. If the function is set to
Off
, the projector will select the last used input
source.